Hi Nikita,
Check if you have maintained the correct storage location in your inbound delivery. I've encountered a similar situation where sloc field was left blank in VL31N. You get a message that the delivery is distributed but you will not find the delivery in EWM nor in the logs. This could be a possibility
Regards,
Smitha
Dear experts,
is there any possibility to clear the PSA in EWM 9.2 without using the NWBC-menu ?
Kind regards
Rodrigo
I am looking for solutions to do direct integration to the EWM API's from my MES system.
Is there any known way to do this?
I think you will find that the job ( RVBDEACT) looks at all activate batches, and will make a decision on whether the batch (currently active) is valid for deactivation i.e. if there is stock (or locked for inventory) you can't deactivate it, likewise if you perform a change to a deactivated batch then it will reactivate that batch again - thus a sensible approach to activating a deactivated batch.
Hope this helps.
There 2 return scenario's and they are:
Scenario 1 - Perform stock return when vendor delivery is accepted in EWM and returning a portion or all of the delivery to vendor.
Scenario 2 - Perform stock return when a PO is placed and entire delivery is refused.
Scenario 1
Create inbound delivery in ECC and distributed to EWM.
Create inbound delivery with reference to inbound notification from ECC to EWM.
Create warehouse task.
system print pick will be created automatically.
perform the physical picking.
verify the pick quantity.
Confirm the task.
verify the GR.
create return delivery.
Display the bin stock in EWM
verify the returns in ECC
Scenario 2
create the inbound delivery in ECC that is distributed as inbound notification in EWM delivery.
create inbound delivery with reference to inbound notification from ECC to EWM.
Reject the delivery.
Display the bin stock in EWM.
I hope it will help you to resolve your issue.
Regards
Irfan A B
Hi
I have a WM system with stocks inclusing of HUs because one of my WM managed storage location is also HU managed.
Now, I have converted WM storage locations to EWM and removed HU management indicators were earlier HU managed and completed all necessary configurations and system is working smoothly (i.e. any inbound/outbound deliveries created in WM managed storage locations are now being distributed to EWM and vice versa along with HUs created either in ECC or EWM systems)
I have uploaded the stocks to EWM system using transaction /SCWM/ISU without an update to ECC system. The stocks uploaded are inclusive of HUs existing in ECC stocks.
When I am trying to issue the HU stocks (which are newly uploaded to EWM) against any customer outbound deliveries using pick WT and do PGI in EWM system, I am seeing the an error (HUSELECT005) in SMQ2 of ECC system for the outbound delivery.
HUs I have chosen for picking are existing in WM system as SUs (in LQUA table) and also in EWM system (uploaded using ISU transaction.
Am I wrong anywhere here.
Depleting the stocks from WM system and then connecting that storage location to EWM system and then uploading hte stocks again into EWM system might work for me but SAP has already provided direct stock upload using ISU transaction without disturbing the ECC stocks.
I have following this direct stock upload to EWM system.
Would you please help me in resolving this issue.
Thank you.
Hi Experts,
Pls throw some light and give me inputs in solving my issue.
My Scenario is STO (Plant to Plant within comp.code) integrated with EWM:
1. Created STO: (Supplying plant/sloc and Receiving plant/sloc are EWM managed)
2. Created Outbound delivery: Distributed successfully to EWM
3. Done the all activities in EWM like Picking, Loading & Goods issue
4. In ECC stock is not reduced and no update of Mat.doc/indbound, and still the ECC Outbound delivery is in open status
5.If I want to try post MIGO wrt Outbound or STO PO is also not possible as my Outbound delivery is greyed out (once its distributed, its not allowing to change).
Thats how I got struck. Dont know what to do, If I am right I followed the correct process.
Thanks to All
Srinivas
Hi All,
I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
Regards,
P@M
Dear Experts
When I try to run the production supply, system does not find the Production Material Request.
Checking the Doc status related to staging are blank
DMP Planning Staging Production
DMS Staging Production
I have activate the Status Profile
/SCWM/PWR
/SCWM/PWR_CMP_CO
/SCWM/PWR_CMP_SO
/SCWM/PWR_OCP
Resend another Production Material request, but still not updating with NOT started.
any suggestions?
/SCWM/PSASTAGE - Assign Bin to PSA/Product/Entitled in Warehouse Number is updated.
many thanks
Natalia
The Smartform can be assigned to the Tcode /SCWM/TU (Shipment) using Tcode SPPFCADM.
The assigned smartform can be seen in transaction /SCWM/TU by choosing the TU number and navigating to the item level tab 'PPF Actions'.
And we can print the smartform by Selecting it (Clicking on the form name or description) and then choosing the print preview button available at the top of the 'PPF Actions' tab at item level.
Hope this would help the people who are new to EWM.
Regards,
Dinesh
Hi Srinivas,
This gives me an idea that you delivery document may be stuck in either inbound queue of ECC(smq2) or outbound queue of EWM(smq1).
In both the queues search first with the delivery number in the stuck queue entries. Once found, check why queue was stuck and then reprocess the queue.
Regards,
-Harsha
Hi Mike,
To be able to map matid from /scwm/ordim_c to /sapapo/matkey you need to convert it.
Pls use the code below:
data lv_matid like /sapapo/matkey-matid.
CALL FUNCTION 'GUID_CONVERT'
EXPORTING
* IV_GUID_X16 =
* IV_GUID_C22 =
IV_GUID_C32 = /scwm/ordim_c-matid
IMPORTING
* EV_GUID_X16 =
EV_GUID_C22 = lv_matid
* EV_GUID_C32 =
* EXCEPTIONS
* NO_UNICODE_SUPPORT_YET = 1
* PARAMETERS_ERROR = 2
* OTHERS = 3
.
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
I hope this will be working for you.
Petr
Hi!
To convert GUID you can use fm /SCMB/MDL_GUID_CONVERT
BR, Alex.
Hi All
Units of measure for my EGR document item is not same as PO item UoM. It is taking Base Units rather.
Is there any SAP Note for this to happen.
I have corrected similar requirement for deliveries (ERP delivery Units were not same as distributed EWM delivery units) using SAP note 1600868.
Waiting for your valuable inputs.
Thank you.
Hello,
I need EWM Roadmap for my presentation. I searched forum but only found strategy till 2014 which i already have.
Maybe Matthias would help? 
Basic words can also help(must be official). Because i have to translate them into Turkish, i can't use your document directly.
What i require;
- Main goals about next releases
- Future plans(for the next 3 years)?
Please help,
Best regards.
Serhan.
Hi,
that should be possible with an immediate release and not setting the flag "add items after release" (or something like that). But that would of course also mean that the WTs are immediately created, question is if that is required.
Brgds
Juergen
Hi!
Im not sure, but you can use SUoM instead of UoM
BR, Alex
Dear all,
thank you very much for you responce.
The log seems following:
A bit more Information to my test:
1) I've created an outbound delivery in ERP which has been replicated to EWM as an Outbound Delivery Request.
2) After Activation of ODR I've got an Outbound Delivery Order
3) For this ODO I have a wharehouse request:
4) And for this Request I'm trying to create an WT.
By the way: how can I change the wharehouse process type in the wharehouse request?
Thank you very much in advance
BR
Denis
Hello,
your ODO has WPT P211, meanwhile your customizing from above has WPT P900, which matters.
You can change WPT directly in /scwm/prdo
Just edit the document, go to item details, switch to form view and find the movement data:
Then to determine the WPT automatically in the ODO, then use appropriate settings in SPRO:
Cross process settings - Warehouse Task - Determine Warehouse Process Type
Enter your document and item type, then process time determination indicator, which will be used in warehouse product master data and the desired WPT.
I hope this helps.
Petr
Hello,
The solution proposed by Alexander works but is only available since EWM 9.1
For earlier version, you should implement BADI /SCWM/EX_ERP_MAPIN_ID_SAVEREPL and modify the EGR qty (in S_QTY) based on the PO unit (in T_ADDMEAS)
Good luck
JM