Hello Experts
I am trying to configure the RF in EWM and have done all the required settings like defining Resource Type,Resource,User etc but when I login to RF I am not getting all the RF options that come at the main screen .I just get one option 01-System Guided.I have maintained Personalization Profile as **.
How can I get the full RF Menu having 5 options.
PFB
Thanks
Please check whether your Menu node is configured properly or not please follow the below screen for referance
Hi Manish
Thanks for the help.
The Menu Manager for my Presentation Profile **** had been updated incorrectly.I have now updated it with the default nodes.I have one query is there any way by which we can just reset this setting to default without having to do it manually and edit each node.
Akhil
Dear Guru, I am integrating quality inspection process using EWM 9.2 and QM in ERP and I have a concern in case of partial acceptance when the usage decision is taken in ECC. First of all, the inspection document after good receipt (Inspection Object Type 4) is successfully created in EWM and replicated as an inspection lot in ECC. Stock type is under Quality Inspection - QI. Then 3 decisions are possible: - Full acceptance: While doing a full acceptance in the inspection lot in ECC, the stock type is successfully changed from QI to Unrestricted-Use in EWM. The follow-up action in EWM is correctly handled. - Full rejection: In case of full rejection in the inspection lot in ECC, the stock type is successfully changed from QI to Scrap as customized. The follow-up action in EWM is correctly handled. - Partial acceptance: Unfortunately, a partial acceptance done in the inspection lot in ECC works the same way as a full acceptance even if a defective quantity has been specified in ECC. A partial acceptance remains possible in EWM through the QI workcenter but what about doing it directly from the inspection lot in ECC. As the new QM-EWM integration (as of 9.1) is considering the stock (article+characteristic+qty), I think a partial acceptance should be handled correctly in EWM and so should trigger different follow-up action or decision on the EWM QI workcenter. Do you have any experience, input, feedback on this matter ? Thanks.
Go through the below link.
Replenishment Control - SAP Extended Warehouse Management (SAP EWM) - SAP Library
Hello Experts,
I am trying pick,pack,pass(user-driven) scenario using LOSC via conveyors--> moving to GI zone.
I have one storage type with 4 aisle, each aisle contains 4 activity area totally 16, I have maintained start-end bin for all the activity area.
when i try to execute in RFUI once the first activity area (first sub WO) picking is done, Pick-HU then branch out due to LOSC ...can't move to next activity area. what i required is all the sub-WOs to be completed first then connect to LOSC.
How can i Achieve this...
Thanks & Regards,
Raj
Hello Raghava,
Did you define this org. area in your integration model? Your filter must only include this organization area.
Best regards
Serhan
Hi Olet,
Thanks for the attention.
I check in /scwm/mon and no pending WT found.
For step IPK1 (internal step PAC), do you mean that I have to set on the Auto WT flag to walk through the process?
Kind Regards,
Clark
Hi!
You can create WT in /scwm/adhu.
Find your HU and press Create+Save without WPT and dest. st.bin
BR, Alex.
Hello Raghava,
To transfer classes and characteristics, you have to create your own integration model in the SAP ERP system. You specify in the integration model which characteristics and class types are to be transferred to the connected SCM system.
The integration models for classes and characteristics should not contain any other objects to keep the integration of classes and characteristics of other master data separate
In the SAP ERP system, assign a special organizational area that you also specify in the integration model to the characteristics to be transferred to the connected SCM system.
Kindly check the org.area on both system.
BR,
Olet
Hi Clark,
If you set it to True system will create WT .
You have to link WPT for this business process.
You can also use the alternative method suggested by alex.
Regards,
Olet
Hi!
Check that your end point of current area = start point of next area
BR, Alex.
Hi guys,
I have outb. process with the next steps:
OB01 (pick) - OB03 (staging)
I have maintained staging bay in /SCWM/STADET_OUT, for example st.bin SB-01
When outbound delivery created SB-01 is determined - it`s ok.
Then worker place 2 HUs (pallets) in SB-01, for example HU1 and HU2.
When worker completed picking (OB01) system propose move pick-HU (box) to dest. st.bin SB-01 and dest. HU = pick-HU.
How can worker confirmed WT to HU1 or to HU2 without applying exc.code chhu? I need choose dest.HU at the moment when confirm WT.
Thx for answers.
BR, Alex.
Hi Alex,
Thanks for the information. And your suggestion is also consistent with the F1 help for the Auto WT flag.
By the way, do the know normally in which case the Follow-on Function --> Create Warehouse Task in Tx. /scwm/prdi can be used? I can not find any documentation on this part..
Thanks and Kind Regards,
Clark
Hello Clark,
We use /scwm/prdi to create a manual WT for putaway during GR.
BR,
Olet
Hello Olet,
Do you mean create a manual WT in /scwm/prdi when process oriented process control is not used?
Thanks and Kind Regards,
Clark
Hello SAP EWM experts,
I am looking for the latest SAP EWM One slider which includes funcitonalities up to 9.3
I have found the one slider which includes functionalities up to 9.1.
Would really appreciate any feedback on that.
Regards
Robert
Dear Guru,
I am integrating quality inspection process using EWM 9.2 and QM in ERP and I have a concern in case of partial acceptance when the usage decision is taken in ECC.
First of all, the inspection document after good receipt (Inspection Object Type 4) is successfully created in EWM and replicated as an inspection lot in ECC. Stock type is under Quality Inspection - QI.
Then 3 decisions are possible:
- Full acceptance: While doing a full acceptance in the inspection lot in ECC, the stock type is successfully changed from QI to Unrestricted-Use in EWM. The follow-up action in EWM is correctly handled.
- Full rejection: In case of full rejection in the inspection lot in ECC, the stock type is successfully changed from QI to Scrap as customized. The follow-up action in EWM is correctly handled.
- Partial acceptance: Unfortunately, a partial acceptance done in the inspection lot in ECC works the same way as a full acceptance even if a defective quantity has been specified in ECC. A partial acceptance remains possible in EWM through the QI workcenter but what about doing it directly from the inspection lot in ECC.
As the new QM-EWM integration (as of 9.1) is considering the stock (article+characteristic+qty), I think a partial acceptance should be handled correctly in EWM and so should trigger different follow-up action or decision on the EWM QI workcenter.
Do you have any experience, input, feedback on this matter ?
Thanks.
Hi Clark,
You can use following function in any process >>
1. Simple putaway >> GR >> Putaway or other way
2. POSC >> GR >> Step1 and step 2.
Now in POSC if you have steps, it is recommended to have auto wt for step 1 so that system will create auto wt for next steps, now if you dont want in this way then create WT via following function.
and for next step use mon and go to hu report and create wt and complete the putaway.
now if you want auto wt , then keep your putaway and rule based table updated for you step, at the same time update master data with proper putaway indi.
Remember for auto wt for next step, you have to close/complete packing step in work center.
check details tab of HU on work center when you do packing step.
Hope you will find above helpful. Please let me know if you have any query.
Regards
Suraj
Hi Robot,
check below link if you get expected details and document.
SAP Extended Warehouse Management (SAP EWM)
Check one of this will def use full
Regards
Suraj