Hi,
Try this table /SCWM/LAGP to correct the HU in storgage bin
Try to reset the fields (ANZLE = "BLANK", KZLER = "X") by Transaction: SE16 (Debugmodus - Variable CODE = "EDIT").
Kaja.
↧
Re: EWM Storage Bin HU = 1
↧
Re: EWM with SAP Retail Vendor Consignment Stock Transfer Order
Hi Daniel,
Thanks for the info, I have already made these settings. Not sure where it is going wrong.
for some reason the 641 is being triggered and not the 641/K and thus creating the 411/K.
I have maintained consignment control in the article master and but still no luck.
Thanks
Kyle
Got it working now, the problem was with the IM/WM movement types.
↧
↧
Re: EWM Layout oriented storage control config
Thanks a lot... you comment saved my day...
↧
Re: Shipping notification could not be distributed
Hi All,
As i am abaper i debug the code of VL31N in both success & failure case i came to know few info is not filling
i went to BD97 in ECC maintained Standard BAPI Destination & Standard dialog destination then everything working fine.
↧
Re: Workcenter: Empty storage bins not displayed
Hi,
"In /SCWM/TWORKST, there is no bin connected."
Not sure if you can work properly at all.
What are you trying to do? OK, move the material to another bin. But why? I don't think the process you want to do is meant to be done in a work center...
Brgds
Juergen
↧
↧
TO creation in single screen instead of "Generate+Next Mat"
Hello,
I have a requirement to create TO in a single screen with multiple line items.Currently as per standard i need to press " Generate+Next Mat" if i want to move to next material,instead of that i want to have multiple line items of materials in a single first screen during TO creation in LT06 .Is it possible???
Thanks.
SK
↧
Re: Workcenter: Empty storage bins not displayed
Hi,
Thats right, i also think so. But it would be the easiest way to book the material during the quality inspection from one bin to another. Our Quality Inspectors are working in SAP ERP QM, we are using the QIE integration.
We are aiming, that the quality inspector is just authorized for /SCWM/QINSP in SAP EWM.
We have to move the material, because the material has to store by -18°C. Our employee has to move the material from the -18°C bin to a storage bin +5°C(according to the quality instruction). In background, the system calculate an expiring date depend on the time at +5°C.
The only way I found is to create an Dummy-HU and lock this HU. So the bin is never empty.
But I would prefer to enhance the workcenter instead of the Dummy-HU.
Best Regards,
Mario
↧
Re: Workcenter: Empty storage bins not displayed
Hi,
so no bin is assigned to the work center? OK, that could only be one. In case of QM, well, yes, you do not really do much in the work center, so probably at first you do not get an error message. But sooner or later you want to create the WT for putaway, don't you? I guess then you have to have a bin.
For the other thing you are trying to do: the work center shows bins in the inbound and the outbound section, also when they are empty. Maybe you should look into this. But: if you then move the HU with drag and drop from one bin to another, the HU is moved, that means there is no open WT anymore. Is that what you want? Does the quality inspector just have to enter this in the work center and the physical movement is already done or is simply then done by him? Or do you need someone to receive a WO and do the physical movement?
Brgds
Juergen
↧
Re: Update/Adjust available stock
Hello Jose Luis.
In the third screen that you attached, I can see that you are trying to move the stock from the transaction "/SCWM/ADHU", so i suggest you to try moving the stock with transaction "/SCWM/ADPROD" to the bin where it must to be.
hope it be useful
Regards.
JD.
↧
↧
Re: E : could not create header data delivery in EWM system
You should provide the solution.
↧
Re: TU Delete Delivery Assignment Does Not Delete Cross-Delivery HU's
Hi
I move your question to EWM space where you can get help from more experts.
Regards,
Claire
↧
report to show pallet ids
hi experts,
Please can I get a standard report to show me list of pallets id
↧
Re: TU Delete Delivery Assignment Does Not Delete Cross-Delivery HU's
Hi Fawaaz
The reason is the HU belongs to two or more deliveries.
If multiple orders from same customer can fit into one HU.
go to /scwm/prdo - under HU tab, cross del check box would be ticked after picking.
thanks
Jobi
↧
↧
Re: Workcenter: Empty storage bins not displayed
Hi,
In my case, the empty bin is not the problem. The problem is, that this bin is not displayed and so I can´t move the HU to this bin with drag and drop. The quality inspector does this physical movement directly by the work center. He only has to take the material out of an cold storage cell.
I already know the problem. I have 2 different storage types. If I would assign a bin to the workcenter, the empty storage bins of this storage typ is displayed. But if I assign no storage typ to the workcenter, just the non empty selected bins are displayed.
I need this 2 storage types, because I need 2 storage locations for the 2 EWM bins in SAP ERP.
So I think I have to do the workaround with the DUMY-HUs.
Best Regards,
Mario Ecker
↧
Re: EWM process flow
Hi Kaushik,
I am unable to Go through those links that you have posted. Getting Error ''No Page Found''.
Can you please help if you have any other links.?
Regards,
Sudheer.
↧
Re: EWM process flow
Hi Sudheer,
You can refer SAP best practices documentation in below link.
SAP Best Practices SAP EWM rapid-deployment solution
BR,
C K Reddy
↧
Re: Workcenter: Empty storage bins not displayed
Hi Mario Ecker,
Work center to storage type relationship is always 1:1. If you want to use two storage types ,please check the possibility to work with two work centers.
BR,
C K Reddy
↧
↧
Re: report to show pallet ids
Hi,
As per my knowledge , standard report not available.But two function modules are available to get the pallet details.
/SCWM/GET_PALLETISATION_DATA Determine Palletization Data
/SCWM/GET_PALLET_DATA_MULTI Determine Palletization Data
BR,
C K Reddy
↧
Re: TU Delete Delivery Assignment Does Not Delete Cross-Delivery HU's
Hi Jobi,
So then the standard EWM process to follow if an HU is cross-delivery and not loaded on TU, is to first do 'Delete Delivery Assignment' and then do 'Delete HU Assignment' also to remove the cross-delivery HU's?
P.S. You can see the cross-delivery checkbox in the HU tab on the TU as well.
Regards,
Fawaaz
↧
Dynamically call RF screens
Hi,
I am new to EWM and this is my first RF development in EWM. My requirement is to control screen flow of my logical transaction for Packing dynamically based on conditions(like skip a screen etc) how to proceed on this? Is there any method which can influence another step/screen?
Thanks,
Faheem.
↧