Hi Juergen Pitz,
As per the SAP Std Documentation configured the settings, but still not achieved the desired result.
If Possible can you please help me with the steps and prerequisites
Regards
Ramesh.R
↧
Re: SAP EWM - Automatically Generate Packaging Items
↧
Re: How to distribute the changed route details in EWM to ECC outbound Delivery.
Hi Jinoy
In ERP Outbound Deliveries are created in advance.
Business does not have idea of the route at that point of time.
So they would like to assign the Route in EWM system
Regards
Ramesh.R
↧
↧
Unloading Task
Hi experts,
I am working with posc storage control.
step1. Door - Gr-zone
step2. Gr-zone - work center
step3. work-center- Final Bin
When I create first WT manually by selecting "No Prc.St.Ctrl " system is creating final putaway WT i.e from Door to Final in Loc.
System is not creating First WT i.e from Door to GR-Zone .
Our requirement is system shall create first and third WT if we select the " No Prc.St.Ctrl.
Help on this will be appreciated.
Thnks,
Srini
↧
Skip the Destination bin assignment screen conditionally
Dear Experts,
I have gone through multiple threads on SCN but couldn't find any solution for this.
I am using below process in '/n/scwm/rfui'
Inbound process-> putaway -> Putaway by cluster
My requirement is to display destination bin assignment screen for first HU only.
Right now this screen is displayed for each HU as per standard behavior. We are planning to use same destination bin for all HUs and hence
Destination bin assignment screen should be displayed only once i.e. for First HU.
Below theraed mentions about skipping RF screen permemnantly but I need to skip it for first HU only.
Customer enhancement in EWM: Skipping a screen in RF transaction
Is there any way to achieve it by config. or by coding in exits.
Please let me know.
Thanks and Regards,
Jitendra
↧
Re: SAP EWM Perform plant to plant transfer of stock within the same Warehouse
Hi,
from what I understand you want to move the material and at the same time do a posting change not only from plant to plant but also from unrestricted stock (that is what I read from the error message) to blocked stock? Because in your text you described that you mapped the non-location dependent stock type BB.
The availability group and the flag mandatory in your storage type should take care of the plant to plant posting. But that does not mean that the stock type (non-location dependent) changes. For this you need to maintain the field non-location stock type in the storage type as well (and the desired target, so BB here).
Did you maintain this?
You only wrote "Assigned the availability group to the storage type : SC1 – SCRA". Or did I miss something?
Brgds
Juergen
---
Want to learn EWM?
Check for EWM courses @ https://training.sap.com/curriculum/scm_ewm
Get a SAP Learning Hub Subscription: https://training.sap.com/shop/learninghub
↧
↧
Goods Receipt - After Putaway
Hi Experts,
When we do create unloading WT system updates the goods receipt status.
Also at same time in ECC 101 movement type is updated.
Is there any way to hold the goods receipt status in EWM/ECC system till Putaway task gets confirmed.
Material document is ECC shall posted after Putaway task confirmation.
Thank you in advance.
Abhi
↧
Re: SAP EWM Perform plant to plant transfer of stock within the same Warehouse
Hi CK,
Thanks for your time on this issue.
I would like to add the following:
1. Performing Posting Change would be not be a viable option as i have created a separate storage type where i would like to move the stock. Posting change does not give me an option to move the stock to a different storage type.
I wanted to implement this solution on the same way availability group works - If two different availability groups are assigned to two different storage types and if they are linked to two storage locations, the system should be able to perform a posting change between sloc to sloc.
2. The stock type role selected is N.
Regards,
Nikhil
↧
Re: SAP EWM Perform plant to plant transfer of stock within the same Warehouse
Hello Juergen,
I would like to add that i was trying 2 things:
1. Sloc to Sloc transfer within the same plant which are assigned to the same warehouse.
2. Sloc to Sloc transfer of stock between 2 different plants which are assigned to the same warehouse.
Lets us talk about scenario 1 first.
Yes, i was trying to do 2 things at the same time. Change the sloc assignment using the concept of availability group which was assigned to the storage type and also change the stock type of the stock to BB using the assignment in the node : Configure Availability Group for Putaway - Configure Stock Type.
therefore, the config would look like this: SC1 - S8 – BB.
Also, i had only maintained the availability group SC1 in the storage type and not the Non loc dep stk type BB in the storage type.
When i used /SCWM/ADPROD, The system gave this error message :
Could not determine subsequent stock type to F2.
Regards,
Nikhil
↧
Re: SAP EWM Perform plant to plant transfer of stock within the same Warehouse
All,
For the scenario 1: Sloc to Sloc transfer within the same plant which are assigned to the same warehouse.
I tried this:
Since the system gave the error message "Could not determine subsequent stock type to F2", it meant it was looking for a stock type that corresponds to F2. Hence i copied the whole line with F2 and then changed the stock type to the custom one and assigning the newly created availability group and the Non Loc dep stock type FF.
Talking about the posting change from FF to BB, this was done by maintaining BB in the storage type.
Additionally, two more lines were created copying the stock types Q4 and B6 and custom stock types like Z4 and Z6 were mentioned. The entries would read like this:
Z4 - New Availibility group - QQ
Z6 - New Availibility group - BB
The reason why these entries were created so that system could perform stock type change from FF to BB by identifying Z6 as the corresponding stock type for B6.
Regards,
Nikhil
↧
↧
Re: Goods Receipt - After Putaway
Hi Abhishek,
It's possible to delay the sending of GR to ERP on customizing. But this only delays the GR status in ERP. On EWM system, the GR status will continue to be updated. This will cause a temporary difference between GR status of EWM and ERP inbound delivery.
SPRO --> Extended Warehouse Management --> Interfaces --> ERP Integration --> General Settings --> Set Control Parameters for ERP Version Control:
Have in mind that depending on the "mode" you use, you may have some restrictions on reversing GR on EWM.
Best Regards,
Felipe
↧
Re: Skip the Destination bin assignment screen conditionally
Hi,
Apply the note 2230367.
Regards,
Mrinal
↧
Re: Skip the Destination bin assignment screen conditionally
Thanks Mrinal..
This note has similar requirement as that of ours but it talks about Outbound picking process.
We want it in Inbound-> Putaway by cluster..
↧
Re: SAP EWM Perform plant to plant transfer of stock within the same Warehouse
Well, and? Does it work now?
Juergen
↧
↧
Re: EWM Layout oriented storage control config
Hello Nazeer,
I succeeded by this setting:
In the storage type configuration. This triggers a HU WT in background to my resource while picking in RF. And this HU WT triggers my layout oriented storage control.
Best regards
↧
Re: How to trigger movement 301 (Plant to Plant) automatically during putaway in EWM
Hi Virendra,
Have you been able to resolve this issue? If yes, how?
Regards,
Nikhil
↧
Re: System could not determine source storage bin Message no. /SCWM/L3008
Hi Ananth (and all),
Did you ever resolve this without manually assigning the source storage bin in the WT?
I am having a similar error:
M product is assigned to stock removal control indicator PI04.
My configuration assigns storage type search sequence PI04 to stock removal control indicator PI04.
SRCI PI04 with Warehouse Process Type ZD01 drives it to storage type search sequence PI04 with Removal Rule ZSHE.
I have stock in Storage Type GA01 for this product.
The only thing I can see that looks odd to me on the log are the rule is ZSHE which is for shelf life expiration and this product should not be subject the SLED (it is a packaging material). There is no expiration date against which to check, so I wonder if that is why it is not finding anything.
I am also not sure if the message text "Storage Type search fully defined: no entry found" should not produce a 'no entry found'.
Let me preface my questions also - I am working with the end users to determine why this is not selecting the storage bin because their EWM consultants are very busy and this is a lower priority, so I offered to jump in and try to figure it out. I have a background in ECC WM, but not EWM - trying to learn a little as I go along here. So, thanks for your patience if my question is a little obvious.
Thanks! Jocelyn
↧
Inbound delivery failed in ECC from EWM
Hi,
I have created PO from ECC and created inbound delivery which is distributed to EWM and notification also created successfully in EWM. I am trying to convert into inbound order and do the GR.
But in ECC the inbound queue got failed and I could see below errors in ECC.
There is no handling unit with identification 350003550000002182
Because of previous error, dispatching is not possible for ID 0900000732
Error during goods receipt posting
Basically system is trying to update inbound delivery in in ECC but its failed. I guess there is some HU config in ECC but I could not find the steps. Can some please help.
Regards,
A Vadamalai
↧
↧
Re: System could not determine source storage bin Message no. /SCWM/L3008
Hello Jocelyn,
The only thing I can see that looks odd to me on the log are the rule is ZSHE which is for shelf life expiration and this product should not be subject the SLED (it is a packaging material). There is no expiration date against which to check, so I wonder if that is why it is not finding anything.
This does not cause an error. This is only relevant if VFDAT is not initial. Your storage type search looks fine.
You said you have removal indicator in product. Does it also have storage section defined? You may have stocks in storage type. But if they are not in preferred storage section, all other stocks will be filtered out.
May not be the case, but make sure stocks are relevant for your document stock type(i.e. available stock F2 = document stock type F2).
If you need further help, please post physical stocks screenshot.
Best regards
Serhan
↧
Re: Negative Stock in interim storage types
Hello Senthil,
You need to find a positive qty stock and move it onto this storage bin. If they match, they will negate each other.
For your next question, negative stock is allowed at LIME section, SCM Basis. Goto: IMG: SCM Extended Warehouse Management >> SCM Basis >> Logistics Inventory Management Engine (LIME) >> Basic Settings >> Application-Specific Settings >> Determine Global Customizing Settings for Each Client.
As far as i remember, this is allowed in standard.
Best regards
Serhan
↧
Re: Inbound delivery failed in ECC from EWM
Hi,
I have verified all the necessary config. but still I am getting the same error.
Regards,
A vadamalai.
↧