Re: Physical Inventory Issue!

Hi Rahul,

Looks like you have done all settings right for Low-Stock check PI process.

As Petr mentioned, you have to test this using RF.  Please follow below steps while performing through RF,

1.  Confirm the Warehouse Task in the RF Environment and perform a low stock check physical inventory.

1. From the main menu, choose 02 Manual Selection
2. On the next screen, choose 01 Selection by WO
3. Enter your Warehouse Order.
4. Press function key F4 to advance to the source location screen.
5. Enter the source bin in the verification field, then choose Enter.
6. In the SrceHU verification field choose Enter.
7. In the Prod verification field, enter the Product Number.  Choose Enter.
8. In the A Qty verification field, enter the picked qty, choose Enter.
9. In the DestHu verification field, choose Enter.
10. The Low Stock Check screen will be displayed.
11. Enter the Remain Qty of product.
12. Press function key F1 to confirm.

2.  Check the physical inventory document that was created upon the task confirmation.

Hope this helps.

Regards,

Nathan